UPVC Replacement Door Handles
As time passes the handles on your doors will get worn out and will require replacement. It is crucial to keep the same dimensions as the handles you have previously replaced when replacing them.
The three measurements to check are the top screw's location, lever and key hole sizes. Use the size guide to help with this.
Inline Lever/Lever
A lever door handle is a contemporary handle that can be used on doors that are new or replacement. This style door handle is offered in a wide range of styles & finishes. This handle is available from a number of manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The handles made of uPVC/Composite are made from robust materials, and are ideal for multi-point lock doors that require a strong design. The handles are inline and work off the same spindle and screw fixings, so they can be easily incorporated into existing or new uPVC/Composite doors.
The design of the sprung lever allows the handle to be placed and angled to ensure a comfortable experience and is suitable for all users. The handle has been endurance tested to 200,000 cycles. This helps to ensure the quality of the finish as well as the performance of the handle over time. The lever that is sprung can be shortened to fit more locks. This is particularly useful in doors with smaller door frames where the cylinder is located further back. A lever that is shorter can be used on doors with latches which can be operated with the thumb on the inside.
Lever Pad
The lever pad upvc handle differs from the lever handles that are used on the majority of doors. These handle types are either operated by a single spindle or by two spindles, inline or offset. They are usually utilized on UPVC doors with double glazing. They are available in a range of finishes & variations.
The handles have been tested to a minimum of 200 000 cycles and are available in several finishes, including White Silver, Chrome, & Gold. The finish is BS EN 1670 Grade 5 and resistant to corrosion. This gives the handle a high performance and durability for the purpose it was designed for.
All UPVC levers for handles come with a spindle, screws and can be installed on a uPVC door. The backplate fixing centres of 211mm permit a bigger size handle that is often a benefit when replacing a faulty or worn multi-point door lock mechanism. The handle levers are spring-loaded, thereby solving the issue of handles hanging out of their horizontal position when they are not in use.
When choosing the replacement UPVC handle and spindle it is crucial to match the dimensions of the PZ on the multipoint lock as well as the uPVC door. This measurement is also called the 'handle centre' or 'cylinder centres' and is a critical aspect in ensuring that you have the correct handles.
After you have identified the correct PZ size and the correct PZ size, you must make sure that the lever and push pads are designed to fit the American with Disabilities Act compliant handles that you need for your door. These are typically square or round with an internal lever and an external push pad.
Most of the UPVC lever pads that we sell are sprung, meaning that they will return to their horizontal position when not in use, instead of hanging out and potentially sticking in the frame. This keeps draughts out of the home. The majority of UPVC lever pad style handles come in both left and right handed versions which allows them to be put on either side of the doors.
Euro Cylinder
Cylinder locks are commonly used on uPVC doors, but they can also be found on other types of doors. The cylinder lock operates by using a key that unlocks the cylinder's casing. This exposes pins that can be aligned to those in the lock, allowing them to rotate the revolving camera, opening the door. Euro cylinders can be equipped with up to six pins with external and internal doors generally having different levels of security.
The choice of cylinder you choose is essential. It is based on the type of use your doors and handles will receive. For instance, doors that are external require a more secure cylinder while doors inside can be secured with the standard cylinder. door handle repair near me repairmywindowsanddoors come with extra features that can increase security, like anti-drill or anti bump properties.
To ensure that the euro cylinder is the correct size for your door, it must be measured accurately. The cylinder should be measured from the central fixing screw hole to the end of the cylinder including the thumb turn if you have one. If you are unable measure it using the lock in a fixed position, you can remove it. A cylinder that extends beyond the handle and escutcheon could be susceptible to attacks like snapping locks, so it is crucial that it's not too long.
The design of most newer cylinders comes with anti-drilling as well as bump resistance features. These features are designed to minimize the chance of a attack by forcing the cylinder rotate in the opposite direction. This can help deflect the attack, and keep your door safe.
Some cylinders are designed to resist snapping. This is a growing method of attack on cylinders, where the break line in the lock is targeted by a tool that is specially designed to snap off the front of the cylinder and allow the door to be opened. This is a much faster and easier way to gain access than using a multipoint locking system. It also leaves less evidence of the burglary which could delay insurance claims.
Spring Cassette
This spring cassette sits within the base of your door handle backplate, supplying a spring-loaded solution to return your multipoint lock handles to their rest position after use. There was a time when handles of this kind did not have a spring integrated into them, and without it they tend to droop or 'drop' once the locking mechanism is removed. This simple component is the most effective way to address this issue. It also prevents your upvc door from becoming stuck in either the closed or open position as they aren't easy to close manually.
These spring cassettes are specifically designed for use with multipoint locks sprung They will not work with unsprung multipoint handles and you will need to have a custom hole cut into your backplate in order for them to fit (please look at the image for a technical diagram). They are a replacement for broken or missing cassettes in the door handle backplate of various kinds of uPVC doors. They are supplied in one unit. They come with a square cut out that accommodates an 8mm shaft.
These spring cassettes are an excellent cost-effective way to fix the problem of handles on your doors sliding. They are simple to install and will extend the lifespan of your uPVC door. Contact us to learn more about our selection of uPVC accessories and spares. We are always ready to offer professional advice and assistance you.